News

Miron Construction projects give construction students professional experience

giffeyt — Wed, 22 Jul 2026 16:00:00 +0000

Miron Construction projects give construction students professional experiencegiffeyt July 22, 2026

Construction majors get up-close experience on multimillion-dollar Heritage Hall, Recreation Complex upgrades

Two major ongoing construction projects have provided 91��Ƭ Polytechnic students with exceptional applied learning opportunities without having to leave campus.

This summer, 13 91��Ƭ Polytechnic students are interning with Miron Construction, Co. Inc., general contractor for both the $144.3 million renovation of Heritage Hall and the $31.7 million upgrade of the Recreation Complex. In addition, a recent two-semester master class led by Miron staff members gave students unique access to the Heritage Hall renovation.

“We are proud to maintain a strong relationship with 91��Ƭ Polytechnic, including helping train the next generation of construction professionals through a variety of internships each year,” said Andrew Daniels, senior vice president of the company’s Eau Claire office. “The ongoing work to transform Heritage Hall and the Recreation Complex has created a unique opportunity to foster these applied learning opportunities right on campus.”

This summer, Miron interns from 91��Ƭ Polytechnic are gaining skills in project management, risk management, network security and technology support. Over the past decade, more than 40 91��Ƭ Polytechnic students have interned for Neenah-based Miron, one of the largest construction contractors in the Midwest.

Among this summer’s Miron interns from 91��Ƭ Polytechnic is Tyler Evans of Shawano, who is pursuing a degree in construction management and a minor in construction safety and risk control. As a risk management intern, Evans focuses on maintaining safety both at the Recreation Complex site on campus as well as at Miron projects around western Wisconsin. That means conducting safety walks, performing safety audits and learning the numerous factors on a job site necessary for maintaining safety.

“Safety isn’t just about us being safe and going home and not getting hurt,” said Evans, who will begin his junior year in the fall. “It’s also about how we can do things easier and faster, but also in the right way where we’re all being safe and taking care of ourselves.”

Tyler Evans, Miron Construction intern and 91��Ƭ Polytechnic construction management major

For Evans, being a risk management intern doesn’t mean sitting in a trailer filling out paperwork. It means getting out on job sites and pitching in alongside the construction crews. “It’s allowing me to gain the knowledge and experience of what people are doing and what they have to do to make their career,” he said.

This summer’s internship, he added, will add a great deal of value to his education: Even if he goes on to become a project manager or a superintendent, the internship will have given him a strong understanding of safety. “The biggest thing about this internship is it’s allowing me to figure out what I want to do with the rest of my life,” Evans said.

Miron Construction’s John Younger, project manager for the Recreation Complex renovation, is a 2011 graduate of the B.S. construction management program, as are many of his coworkers. He said his 91��Ƭ Polytechnic education prepared him for his current role, and he sees Evans getting the same experience on the campus job site.

“Tyler’s always asking a lot of questions. He’s trying to get a handle on what we do and why we do it,” Younger said.

On-campus internship leads to full-time job

Every year, the 91��Ƭ Polytechnic Cooperative Education & Internship Program oversees nearly 1,000 co-op and internship experiences. More than one-third of the time, these internships and co-ops lead to job offers – and Miron is no exception.

Consider recent graduate Lucy Krieg of Kaukauna, who received her construction management degree in May and immediately took a job as safety manager for Miron.

Lucy Krieg, safety manager for Miron and recent 91��Ƭ Polytechnic graduate

Krieg’s journey with Miron began at an on-campus career fair, which led to two consecutive summer internships and then a year-long opportunity to work on the Heritage Hall project as an intern.

“Being able to see things both on the construction site and in the classroom and being able to go back and forth between the two was really important to me,” Krieg said. For example, Krieg could experience something new during her internship, then return to the classroom and ask a faculty member about it. This kind of networking with professors and peers helped fortify the construction knowledge she gained on job sites, Krieg said.

“Looking back, I feel like my internship prepared me exactly how I needed going into my career,” she said. “It gave me the skills and the confidence that I need to back up those skills.”

Sawyer Steineke of Kaukauna is another construction management major who is interning with Miron this summer, working on projects in Green Bay, Kaukauna and elsewhere around the state. Steineke said the internship has given him a deeper understanding of the construction business, “Especially when you get in the field with people who’ve been doing this for the past 30 years.”

Steineke expects to bring his internship experience with him when he returns to class in the fall. “When I get to Heavy Construction and certain classes like that, I’ll have the knowledge that I’ve been on a job that was similar to this,” he said.

Sawyer Steineke, Miron Construction intern and 91��Ƭ Polytechnic construction management major

Likewise, the skills he’s gained this summer will follow him into his professional life. “If you speak to a lot of construction management majors, they’ll tell you a lot of the things you’re going to bring with you into your future career are going to be learned through these internships,” he said. “So, Stout allowing us to be able to do something like this and get credit for it is a really cool opportunity.”

Miron helps create year-long construction master class

The Heritage Hall project also created the opportunity for a new course that gave students unique access to the site and the construction experts working on it.

When the Heritage Hall project was in its planning stages, Lecturer James Bunkelman of the operations and management department reached out to Holly Nowak, a senior project manager with Miron, to see if he could arrange a site visit for students. Instead of offering only a tour, Nowak suggested creating a master class that would be built around the Heritage Hall project.

‘Power of Partnership’: 91��Ƭ celebrates groundbreaking for $144M Heritage Hall renovation

Chancellor, lawmakers, community and campus leaders join to highlight project that will boost Wisconsin workforce

Once a quarter during both the fall and spring semesters, students met for a four-hour class, which began with Miron staff members presenting topics which were then explored on the job site so students could see their real-world application.

“This was polytechnic at its finest. You couldn’t define polytechnic any better than how this class ended up,” Bunkelman said. “It can be very challenging for the students to take the academic side of what we’re trying to teach them and put it into perspective. The goal was to use the fact that Heritage Hall couldn’t be any closer or any better suited for that.”

The course turned out better than Bunkelman could have hoped: Because of the size and complexity of the project, Miron is using cutting-edge technology that might not be found at other job sites, giving students a richer experience. For example, students were able to use a virtual reality 3D model to better understand how site planning works as construction managers determine the placement of construction cranes, parking and pedestrian pathways.

Opportunities for student engagement will continue for the coming semesters, as both construction projects are expected to continue into 2028.

Stout breaks ground on transformative $32M project to enhance athletics, fitness facilities

Renovation, addition funded in part by record-breaking alumni gift

The long-awaited work on Heritage Hall, which opened in 1973 as the Home Economics Building, began last September. The extensive, clean-slate renovation will double the number of students the building will be able to serve to about 4,000. The project was primarily funded through the 2023-25 state budget, with an additional $13.5 million in private funding from university supporters, industry partners and alumni made through the 91��Ƭ Foundation & Alumni Association.

The Recreation Complex project, which began last spring, will add nearly 12,000 square feet of recreation space and renovate an additional 28,000 square feet at the facility, which was built in 1963. The project is primarily funded through student fees as well as a record-setting $5 million gift from alumnus Dallas Pankowski and his wife, Edye, a Menomonie native.

Construction management majors get up-close experience on multimillion-dollar Heritage Hall, Recreation Complex upgrades Miron Construction Scaffolding Training

University Marketing

Heritage Hall Renovation

This project creates a new, unified home for workforce-critical degree programs in the College of Art & Human Sciences and more.

Recreation Complex Renovation

A new renovated recreation complex to improve the student experience with expanded, improved fitness and recreation space.

Search Keywords: construction managementindustry partnershipscapital projects

Hero Caption: Miron Construction conducts safety training at 91��Ƭ Polytechnic.

Include in Directory: Off

Exclude from Internal Site Search: No

Creek restoration, data center viewpoints, sustainability researched by LAKES REU students

goersab — Tue, 21 Jul 2026 13:45:01 +0000

Creek restoration, data center viewpoints, sustainability researched by LAKES REU students goersab July 21, 2026

Nine undergraduates from around U.S. invite conversations at community presentation Aug. 6

Abbey Goers

Early in the morning on one of the hottest days of the summer, 91��Ƭ Polytechnic biology Associate Professor Keith Gilland and students Abi Cherry and Norah Shires trekked to the mouth of Galloway Creek, where it meets the Red Cedar River in Menomonie.

The group is investigating water quality, insect communities, and sedimentation processes in the heavily urbanized stream, as part of LAKES Research Experience for Undergraduates (REU). Cherry, Shires and seven other students representing nine universities from across the country are working to improve the health of the Red Cedar watershed.

Led by 91��Ƭ Polytechnic professors, the students are collaborating across disciplines in environmental science, biology, anthropology and psychology as they seek to develop sustainable solutions with community and government partners, local citizens and policymakers.

Associate Professor Keith Gilland and LAKES students Norah Shires and Abi Cherry measure the width and depth of Galloway Creek.

LAKES co-director Tina Lee, program director of applied social science, has been involved in the federally funded program, part of 91��Ƭ Polytechnic’s experiential learning, since its inception in 2014.

“Our interdisciplinary approach seeks to better prepare students with the analytical skills needed to address complex environmental issues. They are really helping to build knowledge for improving our local environment, water quality, and eutrophic lakes – where phosphorus and nitrogen pollution causes blue-green algae blooms and low oxygen levels – particularly in the Midwestern U.S. Students get the opportunity to see their research directly impact the community around them and make important contributions to new science and policy,” Lee said.

The LAKES program runs from June 7 to Aug. 8. Students and mentors invite community members to a public presentation and forum from 5 to 8 p.m. on Thursday, Aug. 6, at the Raw Deal in Menomonie.

Abi Cherry uses a transparency tube at Galloway Creek to measure water clarity and turbidity.

LAKES REU researchers

91��Ƭ Polytechnic mentors and their students are:

Biology Associate Professor Keith Gilland
- Abi Cherry, University of Cincinnati, biology
- Norah Shires, University of Northern Iowa, environmental science
Biology Senior Lecturer Arthur Kneeland, co-director of LAKES
- James Devereaux, University of Tennessee Chattanooga, anthropology and psychology
- McKenna Dudley, Illinois State, environmental system science and sustainability
Anthropology Professor Thomas Pearson
- Sydney Peterson, UW-Milwaukee, freshwater science and water policy
- Daniel Rogers, University of North Texas, anthropology
- Jacob Smertneck, West Virginia University, anthropology and environmental science
Psychology Program Director Professor Sarah Wood
- Hattie Larson, 91��Ƭ Polytechnic, psychology
- Annabel Raffin, Amherst College, Massachusetts, environmental studies and psychology

Norah Shires uses a DO meter at Galloway Creek to measure temperature and oxygen levels.

Urban stream management and restoration

Cherry and Shires are comparing characteristics of Galloway Creek with those of streams in local nature preserves to determine the impacts of urban watersheds on streams and what management activities might help build a healthy stream through the city. They have visited disturbed, undisturbed and restored sites along the creek.

“This project is the next step in a long history of Stout faculty and students studying and stewarding Galloway Creek and its watershed,” Gilland said.

They are also examining stream morphology – how the course or the depth of the stream has changed over time – as well as the effects of recent restoration projects, focusing on improving the riparian corridor along the stream with the hopes of refining restoration methods and identifying future sites for improvement, including possible channel reconstruction, he explained.

“Water is our most important natural resource; everything living relies on it. Creeks provide water for several ecosystems and contribute to the large bodies we drink from; protecting them and restoring them to good condition will ensure that we get to drink from and recreate in our waters for millennia to come,” Shires said. “The most challenging part of restoration, I think, is public education. Without voters to voice their concerns, funding for restoration projects isn’t placed where it is needed.

“A lot of projects surround the site, like native tree and vegetative plantings, as well as invasive removal. These things help improve the channel of the stream and are achievable,” she added. “What I would like to see is a large-scale removal of impervious surfaces along the creek, like long stretches of concrete. Replacing them with a more permeable material or even forgoing the concrete altogether would reduce urban runoff and improve the overall quality of our waters.”

Abi Cherry and Norah Shires examine insect samples from Galloway Creek in a biology lab.

Circular economy in the Red Cedar watershed

Kneeland, Devereaux and Dudley are studying circular economy in the Red Cedar watershed, with the idea that local commerce has a clearer relationship to the environment, as well as economically benefiting the community in general.

They are using long and short form interviews, talking with local business owners and Chamber of Commerce members to discover people’s attitudes, values and perceived barriers to engaging in local economic activity.

The interviews have also given insight into how people shop, Devereaux noted, adding that he would like to “explore ways that the Chamber helps the community that might not be normally known, and the reasonings behind their decision making.”

Norah Shires and Abi Cherry identify insect samples from Galloway Creek.

Viewpoints on data center developments

Proposed data center development has become a politically charged and controversial issue that raises new questions about energy, water, and future land use and development in the watershed, Pearson said.

He is working with Peterson, Rogers and Smertneck to study the diverse viewpoints and beliefs that shape public debate about data center development. The students are gathering information through participant observation and interviews and are documenting how local history and place identity inform the concerns of residents. They are also looking at how data center proposals have become a catalyst for community organizing, the response of government officials, and the strategies adopted by industry or other stakeholders working to expand data center infrastructure.

Peterson thinks the most impactful part of the LAKES program is the community connection and how that connection makes the research feel more meaningful than any other project she’s pursued.

“I’ve been thoroughly impressed by the close relationship between the city of Menomonie and 91��Ƭ Polytechnic. 91��Ƭ feels very integrated into Menomonie, which creates an atmosphere of trust and collaboration I haven’t experienced before,” she said. “I’ve been really surprised at how much respect the community has for the school’s research and how eager they are to participate in our study, even regarding a contentious topic like data centers.”

Insect samples from Galloway Creek under a microscpe.

Understanding sustainable behaviors and goals

Wood is working with psychology students Larson and Raffin, who are developing two projects using the Theory of Planned Behavior to understand more about people’s thoughts, feelings and behaviors related to sustainability.

Larson is researching people’s general attitudes and opinions regarding secondhand shopping and whether it influences other sustainable behaviors. Raffin is investigating community opinions about Wisconsin and Menomonie’s goal of achieving 100% carbon-free electricity by 2050; how people respond to large-scale sustainability goals that are set at the group level, such as by the city, county, or state; and how effective group-set goals are in motivating behaviors.

They think LAKES REU has been a wonderful opportunity for their team to dive into a wide range of interests regarding sustainability and to gain firsthand experience with the research process. “It has been a great experience to talk with Wisconsin residents and get involved in the Menomonie community,” Larson said.

This material is based upon work supported by the National Science Foundation under Award No. 2446660. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

Students receive a $6,300 research stipend for the summer, as well as housing in 91��Ƭ Polytechnic’s residence halls, a $450 food allowance, up to $500 in travel reimbursement and funding support to travel to the National Conference on Undergraduate Research to present their final research findings.

Applied Research

All Applied Research News

I’m a dietitian who had anorexia. Here’s how I ask about concerning weight loss.

91��Ƭ dietician cautions against avoiding discussing concerning changes to someone’s appearance

Creek restoration, data center viewpoints, sustainability researched by LAKES REU students

Nine undergraduates from around U.S. invite conversations on challenges, opportunities at community presentation Aug. 6

Engineering students support Sierra Space’s lunar testing system

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Nine undergraduates from around U.S. invite conversations on challenges, opportunities at community presentation Aug. 6 LAKES REU biology research 2026

University Marketing

Experience LAKES REU

Experience LAKES REU. Spend two months in Menomonie, WI, research with professional mentors and present your findings at an academic conference.

Search Keywords: LAKES REU

Tina Lee

Dr. Lee is an applied anthropologist who specializes in the anthropology of the contemporary United States, specifically public policy and inequality. She is a graduate of the Anthropology PhD program at the City University of New York (CUNY) Graduate Center and has conducted research about the child welfare system, environmental governance, and humanitarian engineering. She is the author of Catching a Case: Inequality and Fear in New York City's Child Welfare System, published by Rutgers University Press in 2016, as well as serval articles based on her fieldwork in New York City. A book chapter on her follow-up work on child welfare in rural Wisconsin will be published soon. She is also the co-director of the LAKES REU, an NSF-funded research experience for undergraduates site which trains students through research on phosphorous pollution in the Red Cedar Watershed and how it might be mitigated. She teaches anthropology, research methods, and women and gender studies courses and is the program director for the Applied Social Science major as well as the Stout Core Director (Stout's polytechnic version of general education).

Teaching Interests: Cultural Anthropology, Anthropology of Gender, Anthropology of the Contemporary U.S., Qualitative Research Methods, Applied Anthropology

Research Interests: Gender, Race, Poverty and Class; Family and the Law; Women’s Activism; Public Policy; Urban United States

Full Name: Dr. Tina Lee

Job Title: Professor / Program Director / Certificate Advisor

Include in Directory: Yes

College: College of Arts & Human Sciences

Department: Social Science Department

Program

All Degree Programs

Curriculum Vitae: Tina Lee CV (57.7 KB)

Education:

Degree: Ph.D. Anthropology

University: The Graduate Center, City University of New York

Degree: Women's Studies Certificate Women's Studies

University: Graduate Center, City University of New York

Degree: M.A. Anthropology

University: Arizona State University

Degree: B.A. Anthropology

University: University of Houston

CACHSS

Exclude from Internal Site Search: No

Arthur Kneeland

Skills: Teaching, Entomological taxonomy, sampling and IPM. Sustainable Agriculture, GIS proficiency, ARCgis and ERDAS. Statistical proficiency, SAS,

Teaching Interests: Entomology, lab teaching,

Research Interests: Innovative sustainable agricultural techniques, Insect Ecology,

Full Name: Arthur J. Kneeland, M.S.

Job Title: Senior Lecturer

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Biology Department

Curriculum Vitae: Arthur Kneeland CV (51.93 KB)

Education:

Degree: M.S. Renewable Resources Entomology

University: University of Wyoming

Degree: B.A. Sc Applied Science Lab Management

University: University of Wisconsin-Stout

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Engineering students support Sierra Space’s lunar testing system

giffeyt — Wed, 15 Jul 2026 14:30:00 +0000

Engineering students support Sierra Space’s lunar testing system giffeyt July 15, 2026

Alum works with computer and electrical, mechanical engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Tom Giffey

Through a collaboration with Sierra Space, a leading defense-tech space company, 91��Ƭ Polytechnic students are validating critical systems that may be part of missions that return humanity to the moon.

Under the mentorship of alumnus Todd Treichel, Ph.D., a principal manufacturing engineer at Sierra Space, students from 91��Ƭ Polytechnic’s Robert F. Cervenka School of Engineering have been developing methods to ensure that high-tech parts can survive in the harsh lunar environment.

The work comes at a time of revived public interest in space travel, thanks in large part to NASA’s successful Artemis II lunar flyby in April. Sierra Space has been actively developing In-Situ Resource Utilization (ISRU) technologies, including developing a system to extract oxygen from lunar soil, as well as efforts to design inflatable space habitats and support activities for an upcoming Moon base.

For several years, 91��Ƭ Polytechnic students have been redesigning and improving a lunar dust testing chamber. The chamber is used to study how gray, gritty moon dust – technically known as “lunar regolith” – could impact components like gears and lighting elements.

91��Ƭ Polytechnic Sierra Space project research team, from left to right: Luke Stanelle, Heidi Benningfield, Sammie Kotek, Dominick Konkel and Todd Treichel.

“It is very encouraging to know that something our team worked on could impact future designs for lunar testing,” said Sammie Kotek, of New Prague, Minnesota, who graduated in May with a bachelor’s degree in mechanical engineering. “Todd has given us an opportunity to highlight what we learn here at Stout and apply it to something that will reach very important projects. The redesign and testing of the dust chamber could help better design equipment that is being sent to the moon, and I think that’s pretty cool!”

From lab to lunar environment

On a Friday during the spring semester, Kotek was among several students who joined Treichel in a lab in Fryklund Hall to use the dust chamber to test two headlights intended for a moon rover. Colorado-based Sierra Space developed the lights, which are meant to be used on an unmanned rover.

While images from the Apollo missions may make moon dust appear light and fluffy, it’s anything but. Heidi Benningfield, who graduated in May with a mechanical engineering degree, described the substance as “jagged like a kidney stone.” Unlike dust on Earth, which is smoothed and rounded by wind and rain, lunar dust is like a fine, abrasive ash. It’s also electrically charged, Treichel explained, which means it sticks to things – something Apollo astronauts discovered in the 1960s.

SMART Scholarship recipient guaranteed employment upon graduation

Heidi Benningfield, mechanical engineering senior, honored to ‘protect our country’ as federal employee

Over the past two years, a team of 91��Ƭ Polytechnic students have redesigned the lunar testing chamber to make it more functional: For instance, they added variable speeds to the fan that keeps the dust airborne, as well as added a method to keep the dust from settling. Benningfield and Kotek engineered structural components while controls and electrical components were the focus of senior Luke Stanelle, a computer and electrical engineering major from St. Paul; senior Noah Flood Elyafi, a computer and electrical engineering major from Orfordville; and 2025 mechanical engineering graduate Dominick Konkel, who now works at Hewlett Packard Enterprise in Chippewa Falls.

The process had two goals: Measuring how effectively the chamber could coat the headlight lenses with simulated moon dust and assessing how that dust impacts the light output of the lenses. The lenses were coated with a prototype material to prevent dust from accumulating. When compared with an uncoated control piece also placed in the testing chamber, the coating seems to have done its job, Treichel said.

Just as importantly, the chamber that the students designed did its job, too, which will usher in the next phase of the project.

“The ultimate goal would be to take what the students have done and up-scale the chamber size to accommodate larger-sized test articles,” Treichel said. He plans on having several 91��Ƭ Polytechnic students visit Sierra Space’s Madison location this summer to conduct further tests.

Sierra Space Principal Manufacturing Engineer Todd Treichel with the lunar dust testing chamber in a Fryklund Hall lab.

Mentor comes full circle

Treichel, who received his manufacturing engineering degree from 91��Ƭ Polytechnic in 1990, has worked for Sierra Space and its affiliate, Sierra Nevada Corporation, for 18 years. His experience spans manufacturing and design engineering as well as quality, reliability, and environmental testing. He has worked on everything from rocket engines and thrusters to Mars landers, specifically the Phoenix Lander, and payloads sent to the International Space Station.

A few years ago, Treichel was invited to become a member of his alma mater’s Mechanical Engineering Advisory Board. At the encouragement of faculty, he visited 91��Ƭ Polytechnic in the hopes of arranging a project between the university and Sierra Space. He connected with Benningfield, who he described as having an exemplary passion for aerospace, and she interned at Sierra Space and presented at the Wisconsin Space Conference in 2024. Benningfield later completed a three-month paid internship as a SMART Scholar Engineer with the U.S. Army Space and Missile Defense Command.

Last summer, Konkel made a keynote presentation about the lunar dust testing chamber at the conference, which is held annually by the Wisconsin Space Grant Consortium, of which 91��Ƭ Polytechnic is an affiliate member.

Left: Dominick Konkel presents at the Wisconsin Space Conference. Right: Cannisters of lunar and Martian simulants. / Todd Treichel

“Being surrounded by so many brilliant minds and mind-blowing projects and knowing that the work I did earned the keynote spot at the conference was such an amazing achievement,” Konkel said.

“What I learned during this project will contribute to my future career through introducing me to topics that I have grown increasingly eager to explore,” continued Konkel, who plans to pursue a master’s degree in aerospace engineering at the University of Michigan. “These new topics will continue to drive me as I go to grad school and continue to drive deeper into the world of aerospace.”

The lunar dust chamber project grew out of a prototype that was developed about a decade ago, Treichel said. The original chamber prototype had several limitations and was put on pause. However, the launch of the Artemis program and NASA’s desire to return to the moon meant lunar dust testing was once again a relevant topic, and one that Treichel brought to 91��Ƭ Polytechnic students.

“The Stout team really took on an open-ended challenge where they were tasked with providing recommendations for design architecture, presenting them to Sierra Space, gaining approval, and then cut loose to design, build, and test,” Treichel said. The challenge was complex, he noted, involving the synthesis of mechanical and electrical engineering – precisely the interdisciplinary strength of 91��Ƭ Polytechnic’s polytechnic model.

“I found this transition to be most impressive because it represents the real world of aerospace design engineering,” he said. “The amount of electrical engineering was greater than originally planned, but the students figured it out and executed without hesitation.”

The lunar dust testing chamber developed by 91��Ƭ Polytechnic students is shown with containers of simulated lunar and Martian dust.

Kotek, who began working at Scott Equipment Company after graduation, said working on the project not only broadened her horizons but gave her valuable experience working across teams, as the testing chamber was frequently passed between the students as deadlines arrived and new features were added.

She lauded the mentorship Treichel has been able to provide because of his long experience in the aerospace field.

“His knowledge about general engineering and aerospace was highly valuable to my learning experience,” Kotek said. “He taught with a purpose and always wanted us to walk away from a conversation gaining something. He also valued our engineering process and never tried to take our project away from us. When doing projects like this, it’s nice to know that your mentor trusts you to get the job done and does not overstep.”

Treichel said working with students has given him a full-circle experience. “Having graduated from 91��Ƭ, it’s rewarding to work with the next generation of engineers, almost like handing off the baton in a relay race,” he said. “As a polytechnic university, hands-on work coupled with experimentation on prototype hardware really makes this a solid focus on a career-oriented skill that can one day serve the aerospace industry as well as others like it.”

Falling space debris poses an escalating risk as spacecraft get stronger and more heat resistant

Student Reese Hufnagel and Professor Matthew Ray examine the material solutions and ‘designing for demise’ to counter public safety risks

Student’s research aims at space debris

The Sierra Space project isn’t the only space-related research going on at 91��Ƭ Polytechnic. In April, junior Reese Hufnagel presented her work on addressing the growing problem of space debris during the Research in the Rotunda event at the Wisconsin State Capitol in Madison.

Hufnagel, a chemistry major from Anoka, Minnesota, is working with Professor Matthew Ray to mitigate the risk of reentry debris from spacecraft and satellites. Ideally, materials like used rocket stages and old satellites burn up when they fall to earth. However, as stronger carbon-fiber materials have become more common and the number of rocket launches has increased dramatically in recent years, reentry debris has become much more common. To address this growing danger, Hufnagel and Ray have worked to create a catalytic additive that, when integrated into carbon-fiber materials, can cause them to disintegrate when they reach a specific trigger temperature at reentry.

To bolster their work, Hufnagel and Ray have conducted more than 50 interviews with people in the space industry, including experts at NASA, SpaceX and Sierra Space. The pair have also formed a startup to commercialize their work, and Hufnagel has received a research scholarship from the Wisconsin Space Grant Consortium. The pair also recently published an article about their research at The Conversation, an academic outline that rarely publishes work by authors who aren’t faculty members.

Hufnagel will be a panelist in August at the Wisconsin Space Conference this August in Kenosha. In the meantime, however, she will spend the summer as an intern at NASA’s Goddard Space Flight Center in Maryland.

School of Engineering

All School of Engineering News

Engineering students support Sierra Space’s lunar testing system

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Ashley, Cadrex, Apogee among companies benefiting from engineering students’ prototypes

Capstone projects demonstrate mechanical, manufacturing know-how, leadership skills

Inspiring Graduate: Thomas Shamla, B.S. Mechanical Engineering

Hired before graduation at Absolut Manufacturing

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon Sierra Space project team checks equipment

University Marketing

Robert F. Cervenka School of Engineering

The Robert F. Cervenka School of Engineering focuses on enhancing the learning experience for students in 91��Ƭ Polytechnic's engineering programs.

#StoutProud: Todd Treichel ('90)

From developing systems for NASA missions to advancing rocket propulsion, Todd Treichel powers space systems that make missions beyond Earth possible.

Search Keywords: mechanical engineeringcomputer and electrical engineeringspace

Hero Caption: 91��Ƭ Polytechnic students and recent graduates who worked on a research project for Sierra Space look at their lunar dust testing chamber.

Include in Directory: Off

Exclude from Internal Site Search: No

Red Cedar Basin Monitoring Group trains next generation of water scientists

goersab — Wed, 08 Jul 2026 12:30:00 +0000

Red Cedar Basin Monitoring Group trains next generation of water scientistsgoersab July 8, 2026

Faculty, students work across universities in Freshwater Collaborative of Wisconsin’s longest-running programs

Abbey Goers

Biology and environmental science faculty, university students and high school students ventured into the marshes, creeks and wetlands surrounding 91��Ƭ Polytechnic and the Menomonie area this summer to understand and strengthen the health of the Red Cedar Watershed.

Their research is part of three of Freshwater Collaborative of Wisconsin’s longest-running programs that seek to train the next generation of water scientists: the Field Hydrology three-week advanced field course, the Red Cedar River Basin Internship Program, and the Water in Western Wisconsin: An Interdisciplinary Freshwater Field Camp for High School Students.

The programs are led by 91��Ƭ Polytechnic’s Red Cedar Basin Monitoring Group, which works in collaboration with Universities of Wisconsin schools in its efforts. 91��Ƭ Polytechnic received $358,949 in grants from Freshwater Collaborative to run the three programs during the 2025-27 biennium.

Field Hydrology course

The Field Hydrology course was led by faculty from four Universities of Wisconsin, with 14 students from 91��Ƭ Polytechnic, UW-Eau Claire, UW-River Falls and Beloit College. Students spent a week at or near each UW campus conducting hands-on activities in water science.

“By collaborating with faculty at UW-Eau Claire, UW-River Falls, and UW-Oshkosh, we created a course that lets students explore a wider diversity of water-related research and careers than is available at any one institution. Students learned from experts in the field while building on knowledge from their home institutions and emerged better prepared for careers in water resources,” said 91��Ƭ Polytechnic biology Assistant Professor Nicole Hayes.

Hayes and Lecturer Julia Chapman, program director of M.S. sustainable management, brought the students to Birch, Gilbert and Galloway creeks in the Red Cedar Watershed, which includes about 40,000 acres of open water and 4,900 miles of waterways in northwestern and west-central Wisconsin.

Students learned to assess water quality by measuring physical and chemical variables in the stream and on land. They also collected macroinvertebrate samples and analyzed them in the lab, then calculated diversity indices and the biotic index.

The students learned about soils and wetland delineation with Professor Amanda Little, program director of environmental science, and Professor Matthew Kuchta before visiting Muddy Creek wetland. They also spent time on the Kinnickinnic River at UW-River Falls.

91��Ƭ Polytechnic students in the course were Cayanna Erickson, who served as a teaching assistant, and Harrison Bennett, Georgia McGrath, and Carter Tieman. The four students are also part of the Red Cedar River Basin internship program.

As a teaching assistant, Erickson, who interned last summer as well, enjoyed teaching her fellow interns how to conduct stream sampling, seeing them each gain skills ranging from stream monitoring to wetland delineation and from understanding how geology impacts aquatic systems, and seeing their growth in the professional world, she said.

“I think what is most interesting to me about participating in these activities is the various skills that I have developed in these experiences, as well as assisting others in developing those skills, from stream monitoring to wetland delineation, and how geology impacts aquatic systems.

“Collaboration between various universities is extremely important because not all faculty members are able to teach every skill necessary for the professional world. Collaborating also allows students to learn a variety of skills from professionals that they may not have learned otherwise,” she added. “My goals for my research are to solidify a sampling protocol that future interns are able to replicate and continue for a long-term monitoring program.”

Red Cedar River Basin Internship Program

In the Red Cedar River Basin Internship Program, six interns – four from 91��Ƭ Polytechnic and two from UW-Eau Claire – are collecting data throughout the summer. The program is organized through the Red Cedar River Basin Monitoring Group.

The goals of the group are twofold. “First, we are training students to conduct research and monitor in a variety of aquatic ecosystems, so when they graduate, they are prepared to solve freshwater challenges as the next generation of water scientists,” Hayes said.

The students are participating in a range of projects this summer. With Hayes, they are collecting water samples from lakes Menomin and Tainter to assess the size of the harmful cyanobacterial algal blooms and measure concentrations of a toxin produced by these blooms.

With Chapman, they are sampling Birch, Galloway, Gilbert, Hay and Wilson creeks to assess water quality by looking at chemical, physical and biological parameters. They’ll study oxygen and pH levels, nutrient concentrations and conductivity, while also examining bank erosion, sediments in the water, habitat in the riparian zone and macroinvertebrate communities.

With Associate Professor Julie Beston and Assistant Professor Cassondra Vernier, the students are studying the relationship between beaver activity, macroinvertebrates and trout. As they collect data above and below beaver dams, they will also look at trout populations in streams with dams using environmental DNA (the genetic material that organisms shed into their surroundings).

Macroinvertebrates are small organisms that live in streams; many are juvenile insects that mature into flying insects as adults. They are important food resources for fish, and the mature adults are food for organisms that live near streams and lakes. Macroinvertebrates are key indicators of water quality.

Each student is also leading an independent research project they developed during the Field Hydrology course:

Bennett is examining how trout stream restoration impacts water quality and macroinvertebrate communities leading up to and directly after the project.
Erickson is conducting a study to estimate the number of zebra mussels currently in lakes Menomin and Tainter and how rapidly they are reproducing.
McGrath is testing methods to use environmental DNA to examine trout populations above and below beaver dams.
Tieman is examining how fish populations change once trout streams are restored.
Emma Herfel, UW-Eau Claire, is measuring growth of potentially toxin-producing cyanobacteria on rocks in local streams.
Kasey Klouser, UW-Eau Claire, is sampling macroinvertebrates in beaver ponds to gain insights into the importance of these ponds for providing bat food resources.

Water in Western Wisconsin high school camp

During the Water in Western Wisconsin high school camp, which ran June 22-25, 21 students from across the state and the country experienced what it’s like to work in water science through hands-on coursework, preparing them for degrees in biology and environmental science and to enter the workforce.

Camp participants learned about ecological restoration, groundwater systems, water quality, surface water, fish diversity, and water pollution, as well as academic programs and careers focused on water science. Each day was spent in a different location, with experiences led by faculty from 91��Ƭ Polytechnic, UW-Eau Claire and UW-River Falls.

The Red Cedar River Basin Monitoring interns served as teaching assistants and taught the young students how to do the stream sampling, bug identification and water quality monitoring.

Freshwater Collaborative funded the camp, including visits to other UW campuses. The camp has run every year since 2021, making it one of the longest-running and most successful programs through the Freshwater Collaborative.

Overall, the Freshwater Collaborative invested $4.2 million for the 2025-27 biennium in projects that involve faculty, staff and students from all 13 Universities of Wisconsin, as well as dozens of partners from industry, government, local communities, tribal nations, nonprofits and K-12 education. Freshwater Collaborative funding increases research and training opportunities for high school, undergraduate and graduate students and addresses Wisconsin’s biggest water challenges, including PFAS and phosphorus pollution.

91��Ƭ Polytechnic’s biology department offers undergraduate degrees in applied science; biochemistry and molecular biology; biology; and environmental science, as well as an online master's in conservation biology. 91��Ƭ Polytechnic also offers degrees in chemistry and physics.

Applied Research

All Applied Research News

I’m a dietitian who had anorexia. Here’s how I ask about concerning weight loss.

91��Ƭ dietician cautions against avoiding discussing concerning changes to someone’s appearance

Creek restoration, data center viewpoints, sustainability researched by LAKES REU students

Nine undergraduates from around U.S. invite conversations on challenges, opportunities at community presentation Aug. 6

Engineering students support Sierra Space’s lunar testing system

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Faculty, students work across universities in Freshwater Collaborative of Wisconsin’s longest-running programs Freshwater Collaborative Field Hydrology course

University Marketing

Freshwater Collaborative of Wisconsin Research Experience for Undergraduates

Join the Crop per Drop research group!

Search Keywords: Freshwater Collaborative of WisconsinRed Cedar Basin Monitoring Group

Nicole Hayes

Full Name: Nicole Hayes

Job Title: Assistant Professor

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Biology Department

Program

All Degree Programs

Curriculum Vitae: Dr. Nicole M. Hayes CV (103.02 KB)

Education:

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Video production program work highlights viability of Wisconsin as film hub

goersab — Wed, 24 Jun 2026 13:00:25 +0000

Video production program work highlights viability of Wisconsin as film hubgoersab June 24, 2026

Students, alums assist in Deming’s unique medical drama ‘Winter Hymns,’ filmed in Menomonie

Abbey Goers

Los Angeles-based Wisconsin filmmaker Nathan Deming believes that there is an immense, untapped wealth of authentic storytelling in his Midwestern home state, and his goal is to continue highlighting regional characters and communities that audiences instantly recognize.

With his latest film, “Winter Hymns,” Deming also highlighted regional filmmaking talent. His professional crew worked alongside 91��Ƭ Polytechnic video production students and recent graduates: Doran Acero, Braden Borgerding, Parker Cmeyla, Bennett Johnson, Ethan Kulinski, Connor Nelson, Ryan Rumary and Caleb Sander.

“Making movies in the Midwest allows us to capture a genuine, grounded human element that also hasn’t been seen that many times authentically on film before,” said Deming, originally from Tomah.

Bennett Johnson (center left) and Parker Cmeyla (right) on the set of 'Winter Hymns.' / Parker Cmeyla

“Having 91��Ƭ Polytechnic students work alongside a more experienced crew was an incredibly rewarding aspect of this production. The creative energy on set was fantastic because the students brought an immense eagerness to learn, and the professionals involved were incredibly generous with their mentorship,” he said.

“Winter Hymns” was featured at 91��Ƭ Polytechnic’s 4th annual Unspooled Film & Animation Festival, May 9-10. This year’s festival placed a strong spotlight on regional talent and locally produced cinema.

Bringing filmmaking to the Midwest

With his creative roots firmly planted in the Midwest, Deming was at the forefront of the movement for Wisconsin’s new film office, Film Wisconsin. Operated by the Department of Tourism, Film Wisconsin promotes and supports the film and television industry in the state.

The office’s film tax credit makes $5 million available annually to assist the production of feature and short films, scripted and unscripted television shows, documentaries, broadcast advertisements, and production infrastructure in Wisconsin. The tax credit helps drive economic development, builds long-term investment in Wisconsin’s creative community, boosts domestic and global reputation and inspires movie tourism in Wisconsin.

Colleen Madden (left) in a scene from 'Winter Hymns.' / Peggy Trojan

Video production Lecturer Co O’Neill believes filmmaking is on the rise in Wisconsin, as productions decentralize from the coasts. “The passing of the film tax credit was a big deal for Wisconsin. Minnesota, Illinois and Michigan already had state film offices. The opportunity upped the profile of people already making movies here. More people now have a platform and are building a state network of resources for local folks,” he said.

Gabe Roeske, a department assistant in the School of Art & Design and 2019 alum, thinks that with the new tax credit being passed, more potential crew coming out of the university’s video production program, and more independent productions, like “Winter Hymns,” coming to the area, things are starting to move in a positive direction.

“There are already a lot of very passionate and incredibly talented video production people living in Wisconsin,” Roeske said. “They’re people who want to make films just as much as anyone else in the country, and they have the skills to pull it off. Unfortunately, with previous tax laws, lack of film incentives, and just a general lack of productions going on, a lot of people end up moving away in search of video production work.

“Hopefully projects like these, and the work of the video production professors and students, keep the momentum rolling and we can see Wisconsin filmmaking really flourish for the first time,” he said.

Doran Acero assists with sound on the set of 'Winter Hymns.' / Ericka Kreutz

Acero’s “You Must Destroy,” also featured at Unspooled, was filmed in his hometown of Grand Marais, Minnesota. Having graduated in May, he plans to remain in the region, knowing the rich storytelling culture and wanting to represent on film the places he feels most connected to.

“I am so happy to have been a part of the making of ‘Winter Hymns,’ and I want more films like it to be made here in the Midwest. I love the craft of filming and ideally, I can continue to pursue that here; in a place I love with people I love,” he said.

Bringing filmmaking to Wisconsin is something Johnson believes is “incredibly important, especially given the current state of the film industry. As independent filmmaking continues to grow and with the launch of the film tax credit, many young filmmakers in Wisconsin want our voices to be heard and our work to be seen around the world.

“Our goal is to help attract more film and television productions to Wisconsin and establish the state as a viable production hub,” he said. “Beyond the economic benefits, I think it’s an opportunity to showcase what Wisconsin truly has to offer. We are more than our accents or the Green Bay Packers – we’re a state with stunning landscapes, unique locations, and diverse, creative people whose stories deserve to be told.”

‘Winter Hymns’ – A golden opportunity

“Winter Hymns,” which was featured on Wisconsin Public Radio, was inspired by Deming’s father, a family physician who practiced palliative care late in his career. The unique drama, set over the course of a single day in a Midwest hospital, follows a dedicated palliative care doctor, played by Colleen Madden, who meets with a series of dying patients and their families.

Ethan Kulinski and Parker Cmeyla on the set of 'Winter Hymns.' / Parker Cmeyla

Working on a small budget, Deming reached out to O’Neill to see if video production students were available to help. O’Neill’s small-town connections also served well in helping Deming secure the lease of an affordable office building near the hospital in Menomonie for filming.

“Nathan learned about Stout’s program and the quality of our students,” said O’Neill, who’s taught video production for more than 20 years. “They’re composed, professional and excited to be on set. Working on the production of ‘Winter Hymns’ helped the university’s and the program’s profile, while giving the students professional experience. It was a symbiotic experience.”

Acero and Johnson joined Deming’s production team to help with lighting the week before principal photography. As second assistant camera, Johnson was responsible for changing lenses, helping build and prep the camera each day alongside Cmeyla, first assistant camera, and assisting with the on-set camera workflow. Acero served as production assistant, assisted the gaffer, operated the c-camera and ran sound.

Parker Cmeyla (right) on the set of 'Winter Hymns.' / Parker Cmeyla

The students also worked with sound recordist Roeske, who handed the main audio dialogue to a professional post-production sound mixer at Warner Bros.

“As the whole film takes place in a single room, we had to figure out how to make the doctor’s office visually appealing and squeeze a lot of visual variety out of this one location,” Acero said. “This short stint on an independent production was golden. I picked up so much new terminology, got to use tools that were a step above what I previously had, and I made professional connections that have already benefited me greatly.”

O’Neill added that watching professionals work, like cameraman Leo Purman, was life-changing for the students. “Watching his methods was an immersive experience for them that they wouldn’t have had in the classroom. In these guided experiences, they build soft skills while gaining knowledge of equipment and processes. They understand more and come back to the classroom changed in ways of professionalism,” he said.

Nathan Deming (right) and cinematographer Leo Purman on the set of 'Winter Hymns.' / Nathan Ouellette

2026 Unspooled Film & Animation Festival

The Unspooled Festival recognized outstanding achievements across multiple categories:

Best Documentary: “Making It” by Benjamin Mohr (M.F.A. design student).
Best of the Midwest: “A Date with Your Family” by Joel Sacramento (Madison)
Best Short Film: “Stay” by Aden Gonzalez (Racine)
Best Student Animation: “Badge of the Dead” directed by Hannah Brown (B.F.A. animation student)
Polytechnic Pioneers: “Delivery Life” directed by El Ovall (B.F.A. animation student)
Best High School: “Everything I Am, Everything I’m Not” by 17-year-old Xavier Alexander (Texas)
Best Student Short: “Seeing Diabetes” by Ryan Rumary (B.S. video production graduate)

The festival hosted animation premieres, including “Closet Combat 3” by alum Augustus Hinton, with support from a Minnesota Arts Grant; and “Glow” produced by Professor Jesse Woodward alongside several 91��Ƭ students.

Beyond screenings, the festival offered educational programming and workshops that provided hands-on industry experience to Wisconsin students, including 91��Ƭ Polytechnic students and secondary students from Eau Claire, Mauston and Milwaukee.

Guest speakers included Deming, who discussed the art of cinema and regional production, drawing on his decade-long “The Year Project” and his upcoming, untitled Wisconsin thriller. Jeff Kennel, an immersive documentary and editorial filmmaker who has documented conflict, post-disaster recovery, and poverty across 11 countries for NGOs like Americares, alongside commercial work for Trek Bikes and NMDP.

Eau Claire-based filmmaker Tim Schwagel joined the festival to share his invaluable expertise on the art of the short film. Guest speaker Hinton offered audiences an exclusive behind-the-scenes look at his creative process. Bowling Green State University animation instructor Rachel Immel, Sacramento, and alum Reed Theship-Rosales led hands-on mentorship sessions for students.

The 2026 Unspooled Film and Animation Festival was supported by a $10,000 grant from the Mellon Foundation and the Modern Language Association.

91��Ƭ Polytechnic’s School of Art & Design offers bachelor’s degrees in animation and digital media; game design and development-art; graphic design and interactive media; illustration; industrial and product design; interior design; studio art; arts administration and entrepreneurship; fashion design and development; and video production, and an M.F.A. in design.

Video Production

All Video Production News

Video production program work highlights viability of Wisconsin as film hub

Students, alums assist in Deming’s unique medical drama ‘Winter Hymns,’ filmed in Menomonie

Creating music video for underground Japanese rapper is culmination of degree experience for 91��Ƭ graduate

Language barrier, jet lag can’t undermine video production student’s creative ambition

Inspiring Graduate: Ryan Rumary, B.S. Video Production

Hired before graduation as video content media manager for Pest Badger

Students, alums assist in Deming’s unique medical drama ‘Winter Hymns,’ filmed in Menomonie Video production, Winter Hymns, directed by Nathan Deming

University Marketing

B.S. Video Production

You can have the advanced technical knowledge and skills to create and edit your video and media products. Our team environment will teach you how.

Learn More

Search Keywords: video production degreeWinter HymnsNathan DemingUnspooled Film and Animation Festival

Hero Caption: Nathan Deming (center left) directs Colleen Madden (center right) in a scene from 'Winter Hymns.' Photo by Nathan Ouellette.

Keif Oss

Keif has an M.S. in Career and Technical Education and an MFA in Digital Filmmaking. He is an Assistant Professor of video production and serving as Program Director for the B.S. Video Production degree. Keif teaches a variety of courses in video production and photography with both narrative and commercial aspects.

Keif has worked on a range of professional and commercial video projects as a senior video producer and owner/independent contractor of A Creative Advocate, LLC. His work includes television/web advertising, documentary, motion graphics and a variety of marketing-oriented materials. Keif’s expertise and creative contributions include work for 100+ clients including Mayo Clinic, Seventh Generation, State Farm Insurance, Royal Credit Union and others.

Keif has also worked on short and feature film projects in various capacities including writing, producing, directing, camera operation and post-production/VFX.

Full Name: Keif T. Oss

Job Title: Assistant Professor / Program Director

Include in Directory: Yes

Area of Expertise: Video Production Cinema Production Photography Graphic Communications Cross-Media Graphics Technologies

College: College of Arts & Human Sciences

Department: School of Art & Design Design Department

Program

All Degree Programs

B.S. Video Production

Curriculum Vitae: Keif T. Oss CV (408.56 KB)

Education:

Degree: M.F.A. Digital Filmmaking

University: Anaheim University Akira Kurosawa School of Filmmaking

Degree: M.S. Career & Technical Education

University: University of Wisconsin-Stout

Degree: B.S. Graphic Communications Management

University: University of Wisconsin-Stout

CSTEMM SOAD

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Ashley, Cadrex, Apogee among companies benefiting from engineering students’ prototypes

giffeyt — Mon, 15 Jun 2026 12:45:05 +0000

Ashley, Cadrex, Apogee among companies benefiting from engineering students’ prototypesgiffeyt June 15, 2026

Capstone projects demonstrate mechanical, manufacturing know-how, leadership skills

Tom Giffey

91��Ƭ Polytechnic mechanical engineering student Dominick Marco faced several challenges when he became team leader for the second semester of a capstone project on behalf of Cadrex Manufacturing Solutions.

In addition to designing and building a prototype that would automatically assemble a plastic latch and a steel bracket into a completed part, Marco had to ensure that his six-member team stayed on track as the project deadline – and graduation – approached.

Marco wasn’t just learning engineering; he was learning leadership.

“I worked on delegating by asking questions rather than directing, and through this and similar techniques, I was able to stay up to date on my team’s progress while helping direct team members to work on important tasks without overstepping or feeling like I was micromanaging,” explained Marco, of Eleva.

“Working on a project like this with a team is a very valuable experience,” Marco continued. “Learning alongside other up-and-coming engineers has been an incredible two semesters.”

Students, faculty and industry representatives examine the prototype for Cadrex after the demonstration.

Such applied learning, which is key to the polytechnic mission that distinguishes 91��Ƭ Polytechnic, was on display in mid-May as mechanical engineering and manufacturing engineering seniors presented their capstone projects to industry leaders, faculty members and peers. These two-semester projects aren’t theoretical exercises. They lead to real, working prototypes designed to solve problems for industrial sponsors. In addition to Cadrex, one of the nation’s largest metal fabricating firms, corporate sponsors included Ashley Furniture, Tomahawk Manufacturing, Apogee Enterprises, Genesis Industries, Frost Inc. and Industrial Heat Transfer.

“This course sequence truly is a capstone on a student’s academic career at 91��Ƭ Polytechnic,” said Assistant Professor Nathan Spike, part of the capstone teaching team. “Over the two semesters, a student completes the transition from engineering student to a full-fledged, career-ready manufacturing or mechanical engineer – or, in some cases, both for students pursuing a dual major. Students can put what they have learned in these courses directly into practice as they transition into their engineering career.”

According to the university’s most recent First Destination Report, 100% of 2024-25 graduates from the manufacturing engineering program reported they were either employed or continuing their education within six months of graduation, with an average starting salary was $76,000. During the same period, mechanical engineering graduates had a 99% employment rate within six months and an average starting salary of $66,000.

A 91��Ƭ Polytechnic student adjusts piston positions in the prototype. / Submitted photo

Process teaches communication skills

At the culmination of the capstone process, second-semester teams offer presentations of their mechanical and manufacturing solutions, then demonstrate them. During their presentation, Marco and his team – fellow seniors Aiden Koepsel, Ben Swift, Will Schlafke, Darren Byle and Josiah Castleberg – described their project scope and how they reached their final design. Originally, they considered a conveyor belt to carry the two parts. However, this was ultimately replaced with static, angled ramps that bring the two pieces together to become the completed part, which ultimately will be used in a battery holder in a data rack enclosure.

Later, the Cadrex group and other capstone teams moved into a nearby lab in Fryklund Hall to demonstrate their projects. The Cadrex prototype, a single workstation on casters, came to life, smoothly combining the pieces into completed latches, which flowed into a plastic bin.

The prototype that students developed for Cadrex Manufacturing Solutions combined these two pieces into one component.

After the demonstration, team members chatted about the prototype with Wayne Greensky, an automation engineer at Cadrex’s Osceola plant, who provided technical input during the project. While the students had solid technical understanding when they began the project, what really grew over the course of two semesters was their communication skills, Greensky said.

“Communication with project stakeholders helps students shake off communication anxiety and prepares them for proper meeting etiquette, structure, and progress update communications, while also dealing with customer dictated deliverables,” Greensky said.

The 91��Ƭ Polytechnic students handled challenges – including bill of materials ordering and issues with electrical schematics – promptly and professionally, he added.

“This type of project is useful for getting engineering students comfortable with solving an unsolved problem,” Greensky explained. “Undergraduate degree curriculums typically do not prepare the students with coursework that does not have a ‘correct’ answer or solution method. This senior design experience fills that gap nicely.”

Students discuss a pallet destacker they designed on behalf of Ashley Furniture.

Efforts aimed at automation

During the spring semester, the Cadrex capstone group was just one of 13 teams composed of 83 students from 91��Ƭ Polytechnic’s Robert F. Cervenka School of Engineering who worked on projects in Fryklund Hall labs.

Senior Sawyer Boigenzahn, a manufacturing engineering major from Mondovi, was the first-semester team lead for a project to create an automated system to wash and dry extruded aluminum window frames for Apogee Enterprises, owner of the Wausau Windows and Walls brand.

The frames, Boigenzahn explained, are processed in a CNC machine and emerge covered in chips, coolant and cutting fluid. Currently, the parts must be washed by hand, which leads to inconsistent cycle times. Automation would improve the quality and consistency of the process, ultimately saving Apogee time and money.

The five-member team – which also included Boigenzahn, Logan Boettcher, Brody Bongaarts, Brooks Brewer, and Joseph Gardner – conceived of a device that operated something like a car wash, but they pondered whether the sprayer or the aluminum part itself should be what moves. Ultimately, Boigenzahn explained, they decided it was easier to move the part through the sprayers than vice versa.

Based on feedback from their end-of-semester presentation, the team will return to build a prototype of their design in the fall semester. “We are at the start of that process, because this is a very difficult process to automate,” he said.

Boigenzahn, who previously worked as a welder, said the capstone project is a reminder that engineering isn’t about a single input inevitably leading to a single output: It’s a practical discipline that involves hands-on craft.

“For us, it’s an experiment in terms of our ability to understand the mechanical and engineering principles that we’ve been taught and actually apply them in the real world,” Boigenzahn said. “And more importantly, when you encounter real world problems – including teamwork issues, design problems, people giving you conflicting advice – how do you try to solve them? The thing about design is that you can’t just plug it into a computer and it spits out the right answer. That is just not the way this works.”

Despite the challenging work involved in the capstone process, Boigenzahn said it’s ultimately a valuable part of the 91��Ƭ Polytechnic experience. “I don’t think Stout would stand out as much if we did not do these things,” he said.

Capstone students cut holes in an electrical box while building their prototype for Cadrex Manufacturing Solutions. / Submitted image

Teamwork connects students, faculty, industry partners

The capstone process is a team effort, and not just among the students: In addition to Spike, instructors include Senior Lecturer Glenn Bushedorf, Lecturer Anwr Albaghdadi, Lecturer Brandon Dick and Lecturer Niloofar Moradian, with technical support from Paul Craig, program director for manufacturing engineering.

And it’s an effort that leads to results for industry sponsors, Spike explained. “The prototypes students develop often serve as a starting point or otherwise inform the direction a company will go with their process or product,” he said.

In addition, two semesters of intensive, iterative capstone work provide invaluable experience for emerging engineers as they enter the job market.

“Getting the chance to be a part of a project like this and create such a cool prototype machine for Cadrex has honestly been one of the best experiences to date,” Marco said. “This is the largest, most expensive project I have ever been a part of, and it makes me emotional seeing it come to a close. I am sad knowing that I will most likely never see it after it ships away, but I am so very happy to have gotten to design, develop and assemble the prototype.”

School of Engineering

All School of Engineering News

Engineering students support Sierra Space’s lunar testing system

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Ashley, Cadrex, Apogee among companies benefiting from engineering students’ prototypes

Capstone projects demonstrate mechanical, manufacturing know-how, leadership skills

Inspiring Graduate: Thomas Shamla, B.S. Mechanical Engineering

Hired before graduation at Absolut Manufacturing

Capstone projects demonstrate mechanical, manufacturing know-how, leadership skills Cadrex capstone demonstration

University Marketing

Robert F. Cervenka School of Engineering

The Robert F. Cervenka School of Engineering focuses on enhancing the learning experience for students in 91��Ƭ Polytechnic's engineering programs.

Search Keywords: capstonemechanical engineeringmanufacturing engineering

Hero Caption: 91��Ƭ Polytechnic students demonstrate a prototype they created for Cadrex Manufacturing Solutions as part of their senior capstone project.

Nathan Spike

Full Name: Nathan Spike

Job Title: Assistant Professor

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Engineering & Technology Department Robert F. Cervenka School of Engineering

Program

All Degree Programs

Curriculum Vitae: Nathan Spike CV (104.81 KB)

Education:

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Creating music video for underground Japanese rapper is culmination of degree experience for 91��Ƭ graduate

giffeyt — Tue, 02 Jun 2026 13:00:00 +0000

Creating music video for underground Japanese rapper is culmination of degree experience for 91��Ƭ graduategiffeyt June 2, 2026

Language barrier, jet lag can’t undermine Anderson’s creative ambition

Tom Giffey

Maya Anderson wanted to create something ambitious to cap off her B.S. video production degree at University of Wisconsin-Stout – something that would encapsulate her years of experience behind the camera, demonstrate her personal vision and set herself on a path toward professional success.

To meet these goals, Anderson traveled halfway around the world to Tokyo, overcoming jet lag and a language barrier to create a captivating music video with an underground Japanese rapper.

Anderson, who graduated May 16, had plenty of experience creating videos as part of the applied curriculum at 91��Ƭ, Wisconsin’s Polytechnic University. “Even in my first week of freshman year we were already on shoots, setting up cameras and getting real-world practice,” she explained.

For her senior capstone project, Anderson sought a new challenge and a new locale, and she found herself drawn to the bustling capital city of Japan – a stark contrast to her small northern Wisconsin hometown of Marengo. “It’s always a goal of mine to keep shooting in new and unfamiliar places,” she said.

91��Ƭ video production student Maya Anderson, left, worked with Japanese rappers Mezz, center, and OnJuicy in an April video shoot in Tokyo. / Submitted photo

While she’s an experienced international traveler, Anderson had never visited Japan. However, she is fascinated with Japanese culture, especially its urban life, and cites director Gaspar Noé’s surrealistic film “Enter the Void” as an inspiration with its intimate, vibrant portrayal of Tokyo.

Originally, Anderson had intended to travel to Japan to create a stylized travel montage, said Assistant Professor Keif Oss, director of the B.S. video production program. As the project evolved, however, Oss and other faculty members encouraged her to produce something that could expand her portfolio in a more strategic and professionally marketable way, he said.

Anderson decided to make a music video – something she already had experience doing in the United States. Having honed her focus, Anderson was inspired to seek out creative partners in Japan. Through an online forum about underground Japanese rappers, she discovered a hip-hop artist, Mezz, and messaged her through Instagram. “Let’s do it!” responded the musician, and the pair planned and scheduled the video shoot over Zoom.

Maya Anderson's video for "Under the Moon," featuring Japanese performers Mezz and OnJuicy / YouTube

‘A crazy yet rewarding experience’

With the help of a student research grant through the Office of Research and Sponsored Programs, Anderson booked a trip to Japan in late March and early April.

“Coming off a 13-hour flight, entering a 15-hour time zone change, then shooting a full music video within 24 hours was such a crazy yet rewarding experience,” Anderson said.

The young filmmaker collaborated on the video shoot for the song “Under the Moon” with Mezz, OnJuicy (another hip-hop artist), a gaffer, and a hair and makeup artist.

“Mezz was the only one who spoke English,” Anderson explained, “so I was directing using her and Google Translate, which worked out really well. It turned out to be one of my favorite shoots I’ve ever done.”

91��Ƭ student Maya Anderson talks about her video May 5 during Research Day at the Memorial Student Center.

Anderson said she tries to make her videos as immersive as possible to give viewers the sense they are experiencing them with her. “This is a huge reason I shoot almost everything handheld, so it gives my work a human feeling, with all my movements being intentional,” she said.

Eight hours of shooting were followed by a week-long editing process that was both digital and analog. “I love incorporating mixed media into my videos, which ends up being the most time-consuming part,” Anderson said. “I print out every frame of a specific section of the video, then individually draw or cut out each frame, scan them with my printer, and go frame by frame making the images into a video again.”

91��Ƭ video production student Maya Anderson, center, collaborated with Japanese performers and crew members to make a music video in Tokyo. / Submitted photo

Video enjoyed by viewers worldwide

The final video premiered online May 1 and immediately gained praise on social media – although once again Anderson had to rely on Google Translate to read what Mezz’s fans were saying.

Other praise came from closer to home when Anderson shared her video on campus May 5 during the annual Research Day event.

“I’m incredibly proud of her on many levels, and I think the work speaks for itself,” said Oss, who lauded the video as “creatively unique, beautifully designed, and very well executed.”

“Maya’s willingness to travel internationally and pursue a project of this scale says a great deal about both her drive and her creative ambition,” Oss continued. “Producing a film abroad requires a high level of initiative, independence, planning and resilience, especially as a student balancing the demands of a capstone production.”

Behind the scenes of the video shoot for "Under the Moon" in Tokyo. / Submitted photos

Oss added that Anderson’s experience reflects positively on 91��Ƭ’s video production program, which encourages students to think beyond the classroom and pursue real-world projects.

“Maya’s project is an example of students being supported in taking creative risks, applying for research funding and developing work that has personal vision and professional-level scope,” he said. “While not every student will travel internationally for a project, the program is designed to foster that kind of initiative, independence and experiential learning mindset.”

Anderson is thrilled that her capstone experience created a video that people around the world are enjoying.

“It’s an unreal feeling to have had this ambitious idea turn to reality,” Anderson said. “I definitely made my freshman-year self proud. I’m so grateful to have completed this project during my time at Stout, and I’m excited for what’s yet to come.”

Video Production

All Video Production News

Video production program work highlights viability of Wisconsin as film hub

Students, alums assist in Deming’s unique medical drama ‘Winter Hymns,’ filmed in Menomonie

Creating music video for underground Japanese rapper is culmination of degree experience for 91��Ƭ graduate

Language barrier, jet lag can’t undermine video production student’s creative ambition

Inspiring Graduate: Ryan Rumary, B.S. Video Production

Hired before graduation as video content media manager for Pest Badger

Language barrier, jet lag can’t undermine video production student’s creative ambition 91��Ƭ video production student Maya Anderson with Japanese musicians

University Marketing

B.S. Video Production

You can have the advanced technical knowledge and skills to create and edit your video and media products. Our team environment will teach you how.

Learn More

Search Keywords: B.S. video production

Hero Caption: Maya Anderson was among the 91��Ƭ students who presented their work during the annual Research Day on May 5 at the Memorial Student Center.

Keif Oss

Keif has also worked on short and feature film projects in various capacities including writing, producing, directing, camera operation and post-production/VFX.

Full Name: Keif T. Oss

Job Title: Assistant Professor / Program Director

Include in Directory: Yes

Area of Expertise: Video Production Cinema Production Photography Graphic Communications Cross-Media Graphics Technologies

College: College of Arts & Human Sciences

Department: School of Art & Design Design Department

Program

All Degree Programs

B.S. Video Production

Curriculum Vitae: Keif T. Oss CV (408.56 KB)

Education:

Degree: M.F.A. Digital Filmmaking

University: Anaheim University Akira Kurosawa School of Filmmaking

Degree: M.S. Career & Technical Education

University: University of Wisconsin-Stout

Degree: B.S. Graphic Communications Management

University: University of Wisconsin-Stout

CSTEMM SOAD

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Falling space debris poses an escalating risk as spacecraft get stronger and more heat resistant

hugginsm — Wed, 13 May 2026 12:43:23 +0000

Falling space debris poses an escalating risk as spacecraft get stronger and more heat resistanthugginsm May 13, 2026

Student Reese Hufnagel and Professor Matthew Ray examine the material solutions and ‘designing for demise’ to counter public safety risks

This article appeared in Phys.org, Astronomy Magazine, The Mirage, NewsBreak, and others, and originated from The Conversation, an independent and nonprofit source of news, analysis and commentary from academic experts.

When it comes to space debris, what goes up is coming down more often – and not safely.

When spacecraft launch, some components, including nonreusable rocket boosters, are jettisoned to decrease weight, leaving them to intentionally burn up as they reenter the atmosphere. Satellites also enter the atmosphere at the end of their life, supposedly burning up. But in many cases, they are not doing so as predicted.

Debris from partially burned-up spacecraft components and satellites reentering Earth’s atmosphere can pose a risk to people and structures on the ground. The surge in launches, driven largely by private players such as SpaceX, is turning a once-remote risk into a growing threat.

Our materials research group at the University of Wisconsin-Stout is studying the materials that allow reentry debris to survive. We look for ways to safely modify their exceptional heat-resistant qualities to make them safer for atmospheric reentry.

Debris landing on Earth

Reentry debris has fallen on both private and public property around the world multiple times since 2021. Some of the most notable events involve pieces from SpaceX Dragon’s carbon fiber trunk, which stays attached to the crewed capsule until just hours before its reentry. These trunks are larger than a 15-passenger van and used for storage.

Trunk debris from the Crew 7 mission to the International Space Station has landed in North Carolina, and fragments from the Crew 1 mission landed in New South Wales, Australia. Similarly, debris from the Axiom 3 mission landed in Saskatchewan, Canada.

A large piece of space debris from a SpaceX Dragon capsule was found by a campsite groundskeeper in North Carolina in 2025.

In addition to trunk debris, carbon fiber components that hold pressurized gases to adjust a spacecraft’s orientation also make up a lot of recovered reentry debris. Some of these most recent recoveries have been in Australia, Argentina and Poland.

Most of the debris that reenters the atmosphere burns up, so why are these pieces making it down to Earth’s surface?

Atmospheric reentry

Satellites such as SpaceX’s Starlink reside in low Earth orbit, typically between 190 and 1,240 miles (300 and 2000 kilometers) above the Earth’s surface. To stay there, they need to move really fast, at about 17,000 miles (27,000 km) per hour. To reach this speed, a rocket with a million pounds of fuel had to accelerate it, and part of this energy is still contained within the satellite’s momentum.

As an object in orbit drifts down, closer to Earth’s upper atmosphere, it starts to collide with air molecules, slowing the object down. The amount of heat generated from this interaction rapidly consumes the satellite, melting metal at over 3,000 degrees Fahrenheit (1,600 degrees Celsius).

More launches

Countries around the world have been launching items into space since the 1950s, so why is reentry a concern now?

Starting in the 1960s, about 100 objects were launched into space every year – or at least that was the case until 2016. Since then, the number has been increasing exponentially. In 2016, 200 objects launched. But in 2025, that number was 4,500, meaning 20% of all objects launched into space since the 1950s were launched last year.

Most of these launches came from companies in the United States, such as SpaceX and Rocket Labs. Companies like these, along with those outside of the U.S., have plans for large satellite constellations composed of hundreds of thousands to a million satellites.

The more objects and payloads launched, the more reentry events occur. Satellite operators are required to remove their decommissioned satellites from orbit after 25 years to comply with regulations set in place by international committees. Groups across the world, including the Federal Communications Commission in the U.S., have pushed to shorten the deorbit window to five years. Because of these guidelines, the full influx of reentry debris events from these recent launches will not be felt for another 10 or more years.

The objects launched and policy decisions made today will have a lasting effect on future safety.

Carbon fiber

As the world has progressed technologically, efficiency for launching items into space has too.

Satellites and spacecraft are becoming lighter, stronger and more heat resistant because of materials such as carbon fiber-reinforced plastics and new metals. These strong materials are sought after because they’re lightweight, but they can also cause deorbiting debris to withstand reentry temperatures.

Carbon fiber, once used exclusively in space technology, is now found in common items such as bicycle frames and racing car bodies. It is still the gold standard for fabricating high-strength, low-weight materials for spacecraft components such as rocket fuselages, interstaging – the protective housing found between the rocket stages – and pressure vessels that experience extreme temperatures and high mechanical stress and strain.

Simple metals such as aluminum and steel melt and burn away, while complex materials such as carbon fiber, which is manufactured at up to 5,000 F (3,000 C), burn away unpredictably, changing the way jettisoned components break up upon reentry.

Since the early 2000s, a majority of recovered space debris contains either carbon fiber-reinforced plastic sections or metal components wrapped with carbon fiber. The carbon fiber can act as an unintentional heat shield for heavier, more harmful debris.

This map shows locations where confirmed space debris has been recovered. With the increase in launches, the European Space Agency predicts that future space debris could fall practically anywhere across the world. European Space Agency

Design for demise

Design for demise is a major area of research focused on mitigating the risk of reentry debris. Instead of relying on controlled and meticulously timed deorbits that send components that survive reentry into the ocean at the end of their lives, spacecraft components are engineered to ensure they completely disintegrate while deorbiting through the atmosphere.

Design for demise can take many forms. These range from changing to more heat-susceptible materials to relocating harder-to-burn components to areas of the spacecraft that will be hotter during reentry, or using linkages that break apart at high temperatures to separate structures into smaller components to help them burn up.

With so much focus historically on spacecraft being made from the lightest, strongest and most heat-resistant materials available, it may seem counterintuitive to intentionally make some materials weaker. The key is making materials smarter, so they maintain their strength during their mission but weaken under the heat of reentry.

The Conversation

All The Conversation News

I’m a dietitian who had anorexia. Here’s how I ask about concerning weight loss.

91��Ƭ dietician cautions against avoiding discussing concerning changes to someone’s appearance

From Norway to Wisconsin, children want to be social media influencers when they grow up

Professor Matt Simoneau investigates kids' global fascination with careers in social media

Falling space debris poses an escalating risk as spacecraft get stronger and more heat resistant

Student Reese Hufnagel and Professor Matthew Ray examine the material solutions and ‘designing for demise’ to counter public safety risks

Student Reese Hufnagel and Professor Matthew Ray examine the material solutions and ‘designing for demise’ to counter public safety risks satelite-reentry.jpg

University Communications

B.S. Physics

Our B.S. Physics program prepares you for a career in engineering, science, technology, and more through applied experimentation, computation, and research.

Learn More

Search Keywords: The ConversationApplied Research on Space DebrisRisks of Space DebrisSpace Debris ResearchConfronting the risks of space debris

Matthew Ray

Full Name: Matthew A. Ray

Job Title: Professor / Department Chair

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Chemistry & Physics Department

Curriculum Vitae: Matthew A. Ray CV (61.14 KB)

Education:

Degree: Ph.D. Chemistry

University: Lehigh University

Degree: M.S. Chemistry

University: Lehigh University

Degree: B.S. Chemistry

University: Bob Jones University

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Xcel Energy Cedar Falls Hydro project supports construction students’ industry experiences

goersab — Tue, 12 May 2026 15:00:00 +0000

Xcel Energy Cedar Falls Hydro project supports construction students’ industry experiencesgoersab May 12, 2026

Collaboration encourages students to consider impacts of infrastructure on greater community

Abbey Goers

Donning hard hats and safety vests, construction management and risk control students from 91��Ƭ recently stood at the base of the Cedar Falls Hydroelectric plant and peered up at the 60-foot-tall dam that creates the 1,800-acre Tainter Lake, north of Menomonie.

Cedar Falls Hydro is one of 19 hydroelectric facilities in Wisconsin operated by Xcel Energy, with a total generating capacity of about 272 megawatts of renewable and carbon-free electricity.

Xcel Energy is in the midst of a multi-year, $50 million+ project designed to improve the safety and increase spillway capacity of the Cedar Falls Hydro Dam. The phased upgrade first involves upgrades to the spillway, including tie-back anchors and mass concrete infill work. Future phases involve installing upstream cofferdams to install new spillway gates and constructing a downstream stilling basin to help reduce erosion of the riverbed at the dam.

Students in the Heavy Construction Methods & Equipment class, led by Assistant Professor Janelle Skoyen Hestekin and Lecturer John Beckfield, visited the site to see Xcel Energy’s project in operation and witness real-world applications surrounding the major community asset and capital project.

“Xcel Energy supports investment in educating the next generation of construction professionals by providing exposure to real-world construction projects and practical work experiences with 91��Ƭ students interested in the field of engineering, design and construction,” said Xcel Energy Project Manager Anthony Witkowski.

Prior to their visit, students worked together as a mock construction company to develop a broad-based construction plan for a mass concrete infill project, inspired by the Cedar Falls Hydro project. They presented their plan, which included materials, equipment, scheduling, staffing, permits, environmental quality, safety and job hazard analysis, and cost estimates to Witkowski and other Xcel Energy staff at the Cedar Falls site.

“It is clear the students put a significant amount of thought and preparation into their presentations in the areas of construction planning, construction safety, project scheduling and project cost estimating. I appreciated the clear written and verbal communication presented by the students,” Witkowski said.

Xcel Energy is an active member of 91��Ƭ’s Construction Industry Advisory Committee, from which the collaboration and learning opportunity arose. Hestekin adapted her course structure to incorporate the project and guided students throughout the process.

The class project kicked off with a visit from Witkowski and Dean Steines, chief dam safety engineer – hydro operations, who introduced the project background and design goals to the students from the owner’s perspective. They also met with Shane McFadden, CEO of Engineering & Construction Innovations, Inc. (ECI), the project's prime contractor, and ECI project staff to compare their planned approach to how ECI is actively completing the work.

“The project exposed students to the heavy civil sector of construction work, where new talent is needed to grow the workforce. A sincere thank you to Xcel Energy for offering this opportunity to the students,” said Hestekin, who is looking forward to additional opportunities for students to collaborate at the Cedar Falls site and other nearby facilities.

Students from Associate Professors Calvin Chen’s Building Electrical and Control Systems class and Assistant Professor Ashely Der’s Construction Safety / Risk Control class also visited the site to see the operations of the power distribution network to the nearby cities, and safety management procedures, such as hot work – welding, cutting, soldering, and other tasks that produce heat, sparks or flame – and Lockout/Tagout (LOTO), a safety procedure used to protect workers by preventing the unexpected energization or startup of machinery and equipment.

Presenting a complete construction plan

The Cedar Falls dam, constructed in 1910, is one of a few remaining Ambursen dams – hollow dams with open sections between the buttresses on the downstream side of the dam. It is the hollow sections that will be filled with mass concrete, which was the focus of the students’ presentation.

Their broad-based construction plan and estimate for a mass concrete infill project, presented to Xcel Energy as the owner, included staff wages, material and machinery costs, transportation of material, equipment and personnel, and overhead costs.

The students’ simulated work would consist of four separate concrete pours in each of the dam’s 18 bays, with work beginning on Aug. 10 and completion on Nov. 12, taking into account rainfall, river flow and potential temperature-related concrete issues.

Their safety plan listed OSHA safety training requirements; the inspection of equipment, causeway, the local road and dam; and more.

Allie Hubbard, of Forest Lake, Minnesota, Ben Larson, of West Salem, and Blake Bargender, of Abbotsford, think the project was the most beneficial experience in the course, allowing them to visualize their classroom learning in a real-world setting.

“What stood out most was experiencing the project as if we were part of an actual company. I gained a better understanding of how important communication is across all team roles. I also learned the importance of maintaining strong relationships with subcontractors, since the construction industry is highly interconnected,” said Hubbard, who is also majoring in interior design.

Being able to visit the site and talk to the people actually working on the project gave Larson a new perspective and helped him see what the student group did well on their project and what they could have done better, Larson said.

Bargender plans to one day serve as a project manager for a commercial construction company. “This research project, presentation, and site visit significantly helped me prepare for my future career because it simulated a very realistic situation of estimating and planning in the role of a project manager,” he said.

Students contributing to the greater community

Xcel Energy’s long-standing partnership with 91��Ƭ continues to grow in meaningful ways, said Community Relations Manager Tim Bartels. “We are pleased to connect students directly with real-world infrastructure and community assets. We’re especially proud that these collaborations support broader commitment to sustainability, giving students the opportunity to engage with projects that advance clean energy and the communities we serve,” he said.

Hubbard thinks that with industry partners and collaborators, like Xcel, that encourage hands-on learning, “Stout students can continue to make lasting impacts on community and environmental projects by applying what we learn in class to real-world situations. Projects like the hydro facility show how we can contribute to the greater community. I am most interested in the opportunity to contribute to how our world is built in the future and to make a lasting impact on the places people use every day,” she said.

Larson and Bargender agreed and added that students can also make an impact on community or environmental projects by getting involved with student organizations, like the Student Construction Association, Women in Construction, and Sigma Lambda Chi, and by volunteering or joining a construction competition team to gain real experience.

“The more you put in, the more you get out of it,” Larson said. “What I like most about my construction management major is how many opportunities it opens up. In our program, we are exposed to a little bit of everything. So, when we graduate, there are so many directions within the industry. I like that flexibility and the fact that the possibilities are pretty much endless.”

As a construction management and interior design double major, Hubbard enjoys being a part of the entire process “from the very beginning, meeting with clients, understanding their needs and wants, and then bringing their vision to life. It’s especially rewarding to guide clients through the process and ultimately hand over the keys to a finished structure they can be excited about,” she said.

Xcel Energy provides the energy that powers millions of homes and businesses across eight Western and Midwestern states. Its spillway modernization project was approved by the Public Service Commission of Wisconsin in 2021, with the multi-year project beginning in 2022. The project is part of Xcel Energy’s investment in a cleaner electric system, as it drives toward 100% carbon-free electricity by 2050.

Graduates from 91��Ƭ’s B.S. construction management program reported a 100% employment rate within six months of graduation and an average starting salary of $70,000, according to the latest university First Destination Report.

91��Ƭ’s School of Management offers 20 undergraduate and graduate degrees and certificates that build students' leadership skills in operations and management, business, hospitality and technology innovation, and military science fields.

Construction Management

All Construction Management News

Miron Construction projects give construction students professional experience

Construction management majors get up-close experience on multimillion-dollar Heritage Hall, Recreation Complex upgrades

Construction camp introduces young students to careers, degree paths

Tour led by Boldt Company in Chippewa Falls gives campers a behind-the-scenes look at construction site

Construction students among finalists in national ABC Competition

Hyatt Regency Salt Lake City project gives glimpse into real world construction management

Collaboration encourages students to consider impacts of infrastructure on greater community Construction management students at Xcel Energy's Cedar Halls Hydro Dam

University Marketing

B.S. Construction Management

Our B.S. Construction Management will help you develop expertise in technical construction and engineering processes, business management, and marketing.

Learn More

Janelle Skoyen Hestekin

Courses I've taught in the Construction Management program include AEC131 - Architectural Graphics, AEC273 - Concrete and Masonry Technology and AEC357 - Site Engineering.

Full Name: Janelle Skoyen Hestekin

Job Title: Assistant Professor

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Operations & Management Department

Program

All Degree Programs

B.S. Construction Management

Education:

Degree: M.S. Civil Engineering

University: Villanova University

Degree: B.S. Civil Engineering

University: University of Wisconsin-Platteville

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No

Engineering seniors design portable toy tractor manufacturing machine to engage kids in making process

goersab — Tue, 05 May 2026 13:45:00 +0000

Engineering seniors design portable toy tractor manufacturing machine to engage kids in making processgoersab May 5, 2026

Capstone concludes three-year professorship, collaboration with Urban Forestry Board

Abbey Goers

While Wisconsin farmers are out in their tractors preparing their fields, engineering students at 91��Ƭ have designed a portable manufacturing cell – a semi-automated assembly machine – to produce wooden toy tractors for area children.

The cross-disciplinary Taft Wooden Toy Assembly System group is made of five mechanical engineering and manufacturing engineering seniors: Owen Coon, of Appleton; Ben Gurka, of Beloit; Kierce Hemauer, of Menomonie; Ryan Kahl, of Menomonie; Aili Klein, of Lakeville, Minnesota; and Dominick Widi, of Stillwater, Minnesota.

Owen Coon, Kierce Hemauer, Ben Gurka, Aili Klein, Ryan Kahl and Dominick Widi

The two-semester-long project concluded their Engineering Technology Capstone 2 course, under the guidance of Assistant Professor Kevin Dietsche. The manufacturing cell is 40 inches wide, 38 inches long and 36 inches tall. Its height makes it accessible to elementary children, as Dietsche plans to transport the machine to area schools to demonstrate the toy manufacturing process. He can also show the cell on campus tours and at industry conferences. The machine is fully enclosed with safety features, allowing Dietsche to pause assembly and talk about the process.

Constructed to be able to fit in the back of Dietsche’s minivan, the two-part portable cell can be easily assembled and disassembled by one person, and its lightweight aluminum extrusion and plexiglass frame meets OSHA’s standards for a two-person lift. It can produce 20 tractors in an hour, including the main body, front and back wheels, and two dowel axles.

On May 1, the group showcased their system to engineering and technology faculty, as well as retired faculty members John Schultz and Professor Emeritus Jerome Johnson and City of Menomonie representative Megan Hines, environmental program coordinator with the Urban Forestry Board.

They presented again on May 4 to faculty, peers, industry partners, family and community members as part of the Senior Design Experience, which blends the university’s polytechnic tenets of applied learning and research, business and industry collaboration, and career-focused experiences.

The wooden toys, ducks and tractors are constructed from ash tree lumber provided by the City of Menomonie’s Urban Forestry Board.

An interactive toy manufacturing experience for kids

Challenges for the Taft Wooden Toy Assembly System group began on day one, as they essentially needed to redesign the previous group’s manufacturing cell from scratch. The previous design had broken and was not usable for testing.

However, this also gave them the opportunity to revamp the design in their own way. Their concept ideas in CAD included updating the sheet metal frame to a stronger aluminum extrusion and plexiglass frame. This was also a durability and safety consideration. The original sheet metal frame had sharp corners and was not as solid – features the group deemed unsafe, since the machine is meant to be accessible to children.

With Dietsche as their project sponsor, the group’s lead capstone instructors were Assistant Professor Nathan Spike and Senior Lecturer Glenn Bushendorf, to whom they presented their initial research and design concept for critique. The group was aided by Instrumentation Coordinator-Instructor Paul Craig and Lecturer Brandon Dick for coding and controls and Lecturer Mike Miller with sensors.

“The build phase brings a spark to see the fully functional machine. Our overall design has changed a lot. It’s two inches bigger and wider than our initial concept. The cell originally had seven doors, but after talking with Paul, we changed it to have one plated door on top. This cut down on the number of safety latches that we needed,” Hemauer said. “The machine also has an emergency stop button, and if the door is opened during production, the machine will stop.”

The wooden tractor components are fed by Dietsche through the top door into 3D-printed gravity-fed chutes. Then, like a mini-Henry Ford assembly line, five actuators – one for the body and one for each wheel – feed the components through the machine.

At first, the group designed the machine to be automated. “But we switched to have the dowels be manually inserted through the wheels, so kids can engage in the making process,” Klein said. “We also included a human-machine interface (HMI) touch screen for kids to give them an industrial feel. The screen shows images to guide kids through the steps of making the tractor.”

It was Hemauer’s idea of a Pez dispenser that evolved into the bolt-action idea of the manual insertion of the dowels, similar to how a ball is launched in a pinball machine. The insertion of the dowels is a press-fit operation, with no glue involved.

In their research, the group found that the pull force of a 6- to 10-year-old child is 22 pounds. They made the pull factor of the wheels 60 pounds for added safety and durability, knowing children would try to remove the wheels. They also imagined children would attempt to sit on and ride the tractor, although it is only 6 inches long and 3 inches high. With extra-strong dowels, made of oak, and chamfered wheels for structural integrity, the tractor can support up to 200 pounds.

A controls box mounted on the front of the machine houses the circuit board. They also added a plaque commemorating the professorship project, as well as ash wood brackets to cover the metal brackets on the exterior casing, giving the machine a warmer appearance.

The group enjoyed the cross-disciplinary project and understands the importance of the experience as they prepare to graduate and enter the workforce. “Working across majors helps you see other people’s point of view and their strengths,” Gurka said. “We’re building communication skills and the confidence to ask each other questions. It’s being able to admit when you don’t know something and being able to fall back on each other for knowledge.”

A collaboration connecting people to people

The project concludes Dietsche’s three-year G.A. Taft Manufacturing Engineering Endowed Professorship, in which various groups of students designed toys with first-graders, created AI rapid prototypes of toys with kindergartners and built a two-wheel toy assembly system to produce a wooden duck, including its body, wings, wheels and dowel axle.

Professor Emeritus Jerome Johnson gives a brief history of the collaboration during the capstone presentation.

The collaboration between the engineering and technology department and the city’s Urban Forestry Board began nearly a decade ago with the support of a Wisconsin Department of Natural Resources grant. As the city’s ash trees were dying and trees were being cut down, the grant funded the cutting, acquiring, milling, and kiln-drying of the ash wood. The repurposed wood was then used in student projects, creating benches for the City of Menomonie parks.

The projects were fostered under the guidance of Johnson and Nancy Schofield, a former 91��Ƭ professor and member of the Urban Forestry Board, who has since passed.

“Students wanted to see something that they built be used out in the city. Students became leaders and produced projects I never imagined possible,” said Johnson, who was honored as Citizen of the Year by the Menomonie Urban Forestry Board in 2021.

Professor Kevin Dietsche presents Environmental Program Coordinator Megan Hines with a toy wooden tractor and duck.

Students produced more than 20 city benches from the repurposed ash wood between 2018 and 2021, when Johnson retired and Dietsche stepped in to take his place. “This project has impacted how I teach. It follows a high-impact practices model (HIPS), which reinforces the importance of partnerships and hands-on activities, creating a whole team of student leaders,” Dietsche said.

“This project is something special. We’re able to take something dead and dying and give back to the city, with an end goal of showing kids the engineering process – from mechanical and technical to packaging. The real key is connecting people to people,” he added.

Dietsche plans to continue similar projects with the addition of artificial intelligence and circular design practices in the research and development, as well as construction and repair processes.

Graduates from 91��Ƭ’s mechanical and manufacturing engineering programs reported 99.5% employment rate within six months of graduation and an average starting salary of more than $70,000, according to the latest university First Destination Report.

91��Ƭ’s Robert F. Cervenka School of Engineering is home to five ABET-accredited programs that also include computer and electrical engineering, engineering technology and plastics engineering, as well as a sixth bachelor’s program in packaging. A master’s in manufacturing engineering is available on campus or online.

School of Engineering

All School of Engineering News

Engineering students support Sierra Space’s lunar testing system

Alum works with engineering students to improve lunar dust testing, bolstering NASA’s return to the moon

Ashley, Cadrex, Apogee among companies benefiting from engineering students’ prototypes

Capstone projects demonstrate mechanical, manufacturing know-how, leadership skills

Inspiring Graduate: Thomas Shamla, B.S. Mechanical Engineering

Hired before graduation at Absolut Manufacturing

Capstone concludes three-year professorship, collaboration with Urban Forestry Board ETECH capstone, toy tractor manufacturing cell

University Marketing

B.S. Manufacturing Engineering

Our B.S. Manufacturing Engineering program trains you in engineering design, robotics, artificial intelligence, automation systems, and industrial management.

Learn More

B.S. Mechanical Engineering

Our B.S. Mechanical Engineering program covers mechanics, kinematics, thermal/fluid sciences, materials sciences, and more.

Learn More

Search Keywords: Mechanical engineering degreeManufacturing engineering degree

Kevin Dietsche

Teaching Interests: Joining, Foundry, Fluid Power, Mechatronics

Full Name: Kevin Dietsche

Job Title: Assistant Professor

Include in Directory: Yes

College: College of Science, Technology, Engineering, Mathematics & Management

Department: Engineering & Technology Department

Curriculum Vitae: Kevin Dietsche CV (230.15 KB)

Education:

CSTEMM

Exclude from Internal Site Search: No

Include in Directory: Off

Exclude from Internal Site Search: No